Fives HPM's RoboTDM Targets Large-Part Machining With Robot-Mounted Spindles

The Liné Machines system combines a calibrated industrial robot with a configurable spindle end effector for milling, trimming and drilling where tolerances near 0.1 mm are sufficient.

Fives High Precision Machines (Fives HPM) is offering the Liné Machines RoboTDM as a robotic machining system for large workpieces that need milling, trimming or drilling but do not require the full capability of a large CNC machine tool. The system is intended for applications where tolerances down to about 0.1 mm are acceptable.

Instead of bringing a large component into a machine envelope, RoboTDM brings the machining function to the part. An industrial robot carries a specialized end effector with a spindle, toolholder and cutter, allowing material removal directly on the workpiece. Fives says this approach can cut setup time and simplify programming while avoiding the cost and floor-space demands of a large CNC machine.

The system can be used for metal face milling, deburring castings, trimming excess weld beads and drilling pilot holes on large aerospace panels or automotive body parts. It is also intended for trimming, routing, drilling, edge contouring and pocketing on large composite or thermoplastic fabrications. These are tasks that, with a CNC machine, can require substantial setup and programming, according to Fives.

Closing the accuracy gap

Conventional industrial robots have generally traded flexibility for positional accuracy, with typical systems reaching tolerances of about 0.3 mm. That level is insufficient for many machining operations. Fives' development work on RoboTDM focused on closing this gap through high-precision robotic machining, combining robot calibration with look-ahead and motion-planning algorithms.

The company says the control approach can process programs containing more than one million points without the latency that can otherwise compromise robot motion. The result is smoother trajectory execution and support for multi-axis contouring and complex machining operations that is closer to CNC performance. RoboTDM can reduce machining deviation by up to 100 μm, or 0.1 mm, which Fives describes as a threefold improvement over conventional robotic accuracy.

Configurable machining package

The machining end effector can be configured with different spindle sizes, power ratings, torque and speed. Available systems provide spindle power up to 125 kW, torque up to 80 Nm and speeds reaching 30,000 rpm, with HSK A63, HSK F63 or HSK A100 taper toolholders. RoboTDM can also include automatic tool changing, tool measurement, tool-breakage detection and part probing, while a vision system can support drilling.

Machining is not the only process the platform can accommodate. Fives says RoboTDM systems can be configured for waterjet cutting, laser profiling and ultrasonic cutting. Multiple workstations and customized peripheral equipment are also possible, and relatively modest foundation requirements can simplify installation compared with a large CNC machine tool.

Where the system fits

Fives sees particular potential in aerospace, defense, maritime and energy, where components can be large and production requirements vary. The company says several years of research and development trials have demonstrated cycle-time reductions of up to 70% in trimming and milling, with some individual applications achieving greater savings. Those results are presented as development findings rather than a guarantee for every part.

RoboTDM is not intended to replace high-precision CNC machining in every case. Where tolerances tighter than 0.1 mm are necessary, Fives says a high-precision CNC machine remains the appropriate choice. The robotic system is therefore positioned as complementary to Liné Machines and the wider Fives HPM portfolio. For suitable components, Fives says it can offer lower capital investment, simpler installation, greater flexibility and shorter cycle times.

The product reflects Fives HPM's "precision at scale" cross-brand approach and draws on Liné Machines' experience in large-scale milling and material removal. Fives says the development originated from customer requirements. Fives Liné Machines Inc, now part of Fives HPM, has had a North American presence for almost 50 years through its Granby, Quebec, facility, which produces Liné CNC machine tools and robotic solutions including RoboTDM. The site also supports engineering, integration, automation, service and training across equipment lifecycles.

IM

Isabel Moreira

Isabel Moreira covers industrial machinery procurement, with a focus on capital equipment specification, plant utility interfaces, spare parts planning, and total cost of ownership across packaging, fluid, and process line families. Her coverage compares quantified acceptance values such as factory acceptance test limits, utility consumption, specific power, MTBF, and MTTR, and treats catalogue ratings as unverified until documented conditions are stated. She writes for capital procurement managers, plant directors, and maintenance leads who must compare supplier offers, define installation interfaces, and justify lifecycle cost decisions.