HAMS Garments Cuts CO2 Emissions 78.1%, Earns WCES Certificate

The Bangladesh apparel manufacturer received the WCES Certificate after cutting CO2 emissions by 78.1% at an existing factory.

HAMS Garments Ltd. has achieved a 78.1% reduction in CO2 emissions and received the World Championship for Energy Savings (WCES) Certificate. The company is described as a leading contender for the 2026 WCES Award.

The recognition focuses on energy performance and decarbonization at an existing garment manufacturing facility. HAMS did not replace the plant; it carried out an operational transformation combining energy efficiency, renewable energy, commissioning, metering, controls, preventive maintenance and staff engagement.

The facility in Bangladesh has a gross floor area of 203,030 sq ft (18,861.95 m2) and about 3,216 regular occupants. Its continuous energy demand comes from production, lighting, ventilation, cooling, compressed air, pumps, motors and other building and process systems.

Efficiency and renewable energy

HAMS used ASHRAE Level 1 and Level 2 energy audits to identify and prioritize investments. Measures included upgrading and optimizing energy-consuming equipment and systems, improving lighting efficiency, reducing unnecessary electrical loads, optimizing motors and pumps, and improving ventilation and cooling performance. Energy metering and sub-metering were strengthened to make consumption more visible and support corrective action.

A 550 kW on-site solar photovoltaic system was a major investment. Renewable energy now represents about 47.36% of the project’s energy use, reducing dependence on grid electricity and fossil-fuel-based energy. Together with efficiency measures, these actions contributed to a 75.25% overall energy saving.

The building achieved LEED v4 Existing Buildings: Operations & Maintenance Platinum certification with 108 out of 110 points. The certification was presented as independent evidence of the approach’s effectiveness and of the decarbonization potential of an existing industrial building.

Operational discipline

HAMS supports physical upgrades with energy-management and operational optimization. Energy performance is continuously monitored through metering, equipment trend reviews and building-management practices, helping the facility team identify abnormal consumption and inefficiencies. Ongoing commissioning, preventive-maintenance planning, equipment performance monitoring and defined operational responsibilities are part of the system.

Energy use is periodically reviewed against expected performance so that corrective action can be taken. A demand-response programme, including a 10% demand-reduction drill, shows the facility’s ability to manage electrical demand during periods of grid stress. Operating schedules and equipment use are also reviewed to minimize unnecessary loads while maintaining manufacturing requirements.

Staff engagement

The company also integrates staff training, operational guidelines, employee engagement and responsible energy-use practices into its programme. Facility and maintenance personnel receive training on efficient operation, preventive maintenance, energy monitoring and corrective actions. Procedures encourage equipment to run only when required, unnecessary loads to be switched off and energy-intensive activities to be managed without compromising production, safety or occupant comfort.

Employees are engaged in the broader sustainability programme, and the facility uses structured action plans, assigned responsibilities and periodic performance reviews to maintain accountability. HAMS presents this combination of technology, operational discipline and behavioral engagement as a replicable approach for the apparel sector, where savings can come not only from capital investment but also from better operation, informed users and continuous performance management.

AS

Anika Stein

Anika Stein covers technical textiles and nonwovens, including protective fabrics, spunbond and meltblown hygiene materials, and reinforcement fabric inputs. Her analysis uses measurable material indicators such as basis weight, web uniformity, tensile and tear strength, limited flame spread under stated test conditions, and fiber orientation, while treating standard applicability as separate from finished-product certification. She supports Quality Assurance Managers, Textile Technologists, and Compliance Specialists in material specification, incoming inspection, and supplier evidence review without issuing regulatory approvals or PPE certification claims.