HandySCAN 3D MAX Series is aimed at aerospace teams that need to measure large, complex components without depending solely on fixed metrology workstations. The series extends the EVO platform to large-part measurement through two models, the HandySCAN MAX EVO and HandySCAN MAX EVO Elite. The stated applications include quality control, quality assurance, maintenance, repair and overhaul, and non-destructive testing.
Two accuracy levels
The MAX EVO is specified with volumetric accuracy of 0.150 mm + 0.020 mm/m. According to the product information, it is intended for aerospace product development teams measuring large, complex components. Its portable format is designed to capture 3D measurements where aircraft structures and components are being developed, inspected or maintained. The scanner is described as handling varied part dimensions, intricate shapes and surfaces that are hard to measure, including highly reflective ones, without surface preparation. Fuselage sections, wings and structural assemblies are cited as examples, with the approach said to cut the setup and disassembly work that can delay inspections.
The MAX EVO Elite is positioned for quality workflows that require higher precision, including large-component inspection and non-destructive testing. Its specified volumetric accuracy is 0.075 mm + 0.010 mm/m. The series is said to retain measurement reliability and accredited accuracy under ISO 17025 and VDI/VDE 2634 standards. Integrated photogrammetry is intended to support accurate measurement of large, complex parts outside controlled environments.
Inspection at the point of work
That capability outside controlled environments is presented as relevant to aerospace maintenance, where inspections may need to take place on the hangar floor without moving the aircraft or component to a dedicated inspection area and where downtime must be minimized. The product information states that accurate 3D data can be captured without extensive setup. When paired with the Mobility Kit, the series is designed for wireless, cable-free inspection for daily quality control. The practical claim is that inspection can move to the point of work, reducing reliance on fixed workstations, carts and cumbersome cable arrangements.
The EVO platform also incorporates an embedded screen for scanner control and real-time data visualization. Keeping scan data and the physical part within the operator’s line of sight is intended to make measurement work more comfortable, including complex, elevated and overhead scanning tasks. Real-time mesh visualization lets operators check data coverage while scanning and identify missed areas before leaving the part.
For hangar and other real-world environments, the combination of mobility, continuous feedback and fast data acquisition is intended to streamline the path from scan to report. Technicians can move around large aircraft structures and hard-to-reach areas, capture data at the asset and complete inspections with less interruption to maintenance and quality workflows. These are presented as workflow benefits of the product design; no independent field results, customer cases, pricing or availability details are included.