Instron Highlights High Strain Rate Testing to Improve Crash Simulation Accuracy

The testing-machine maker says rate-dependent material data can make simulations more representative and help engineers compare materials earlier in development.

High strain rate testing can provide material data that helps engineers make simulations more representative of rapid impact and crash events, according to Andrea Incardona, application engineer and product specialist at Instron. In the article, Incardona says such data can also inform material selection and support product development before physical prototypes are committed.

Many materials have strain-rate-dependent properties, meaning their mechanical response changes as loading speed increases. A material characterized under quasi-static conditions may therefore behave differently in a rapid impact or crash. Incardona argues that capturing this behavior gives engineers a more representative basis for simulation, rather than relying solely on conventional data.

The article cites a 2025 study published in the SAE International Journal of Materials and Manufacturing, titled 'Influence of Strain Rate Effect on Mechanical and Crashworthiness Properties of CFRP Composite Structures,' which found that incorporating strain-rate-dependent material properties into crash simulations reduced discrepancies between simulated and experimental results. The peak acceleration discrepancy fell by 6.5%, while mean acceleration and displacement discrepancies fell by 5.9% and 6.3%, respectively.

Testing across loading rates

Depending on the specimen, materials can be characterized from quasi-static conditions up to strain rates approaching 1,000/s, according to the article. The achievable rate depends on the material, specimen geometry and test method. High strain rate tests can last only 3 to 10 milliseconds, requiring data acquisition capable of resolving rapid changes in force and deformation.

Instron says its high strain rate testing systems support data acquisition at up to 200 kHz. Digital image correlation can provide additional information about strain development across the specimen, while analysis tools can support data processing and theoretical modelling.

From material selection to design

Conventional properties such as strength and stiffness remain important, but they do not necessarily show how a material will respond when loading becomes rapid. Two materials that appear comparable under conventional testing may behave differently under high strain rate conditions. Characterizing their dynamic behavior allows engineers to consider how each material deforms, absorbs energy and ultimately fails under conditions relevant to the application.

This can matter when performance must be balanced against weight. In automotive crash structures or aerospace components, understanding dynamic material behavior can inform decisions about both material selection and component design, the article says.

Incardona describes dynamic characterization as part of a development process in which material behavior is measured, incorporated into simulation, used to compare design options and then validated through physical testing. This makes material testing more than a final check on an existing design, the article says. Engineers can use dynamic data earlier in development to assess whether a material is suitable, refine a component design and understand how changes may affect performance.

The value of the data depends on its relevance to the conditions a component will face. By revealing how materials respond to rapid loading, high strain rate testing gives engineers a more complete picture of performance, Instron says, helping them make better decisions from simulation through to product development.

MK

Mira Kovalenko

Mira is a renewable procurement and lifecycle editor covering solar PV modules, inverters, battery energy storage systems, charge controllers, mounting and balance of system, EV charging infrastructure and wind systems. Her comparisons apply levelized cost of energy with stated assumptions, usable energy in kWh, cycle life at defined depth of discharge and documented warranty allocation to the exact model. She supports EPC project directors, distributor product managers and procurement directors comparing cross-family specifications, verifying model-specific documentation and deciding where lifecycle cost and warranty responsibility need closer review.