KraussMaffei Extrusion has developed a single-stage, continuous extrusion process for PVC roofing membranes that it calls PVC InlineMixing. The system is designed to replace the conventional two-stage route in which PVC powder, plasticizers, additives and fillers are first combined batchwise in a separate hot-cold mixer to make a dry blend. That blend is cooled, stored and later plasticized in a twin-screw extruder before being formed into membrane.
In the new arrangement, all solid and liquid ingredients are metered directly into the extruder by gravimetric dosing systems. KraussMaffei says the material therefore has to be heated only once. Depending on the formulation, system parameters and location, the company reports that energy consumption and associated costs can fall by up to 75%.
Lower capital and operating burden
Because no separate heating-cooling-mixing combination is required, manufacturers avoid investment in that equipment. The company also cites reduced floor-space needs and lower labor costs. Maintenance requirements are described as lower as well, since wear parts for the heating-cooling mixer are no longer needed. KraussMaffei frames the combination of lower capital expenditure and lower operating costs as an improvement in overall cost-effectiveness and a basis for a faster return on investment.
The continuous concept is also intended to make production more flexible. Formulation adjustments and color changes can be made during operation through the integrated control system, according to the company, without the preparation and intermediate storage of separate dry-blend batches.
Christopher Bartel, Head of Sales Flat & Foam at KraussMaffei Extrusion, said the approach gives membrane producers lower production costs, greater flexibility and more efficient manufacturing. He added that they can respond faster to new requirements, adjust formulations during production and reduce energy and capital expenditure.
Validation and reference installation
The process was developed at KraussMaffei Extrusion's Technology Center in Laatzen and tested with industrial roofing-membrane formulations. The trials used a co-rotating twin-screw extruder from the ZE 65 BluePower series, fitted with loss-in-weight feeders for all solid components and multiple liquid feeders for free-flowing ingredients. The ZE BluePower series has a Da/Di ratio of 1.65; the company says the combination of high torque and large free volume gives a broad process window for different formulations.
Tests confirmed what KraussMaffei describes as excellent PVC gelation and high product quality. The mechanical properties and weldability of the membranes also met industrial requirements across several formulations, according to the company. Bartel said the results show the potential of PVC InlineMixing for industrial roofing-membrane production, and that the Technology Center works with customers to test their formulations under production-relevant conditions, optimize the process and prepare for industrial implementation.
The process is already running in an industrial production line for PVC roofing membranes. The reference plant uses two extruders and two calenders to reach a total throughput of 1,800 kg/h. PVC, additives and fillers, together with edge trimmings generated in the line, are processed continuously into finished membrane.
KraussMaffei presents PVC InlineMixing as a way to combine high product quality with a leaner production route. For roofing-membrane makers, the claimed benefits are lower energy and equipment costs, reduced space and labor requirements, and faster formulation changes; the actual outcome will depend on the formulation, line configuration and operating conditions.
