SinceVision has introduced the SGI-N030W, a wide-spot laser displacement sensor for high-speed, non-contact dimensional measurement on rough, textured and irregular surfaces. The product extends the company’s SGI Series and is aimed at lithium-ion battery manufacturing, semiconductor processing and precision mechanical engineering, where micrometre-level measurement is required. The sensor uses an expanded laser spot with optical triangulation, an approach SinceVision says is intended to reduce the instability that conventional point-spot laser systems can encounter when surface finish varies.
Averaging surface features before conversion
Point-spot sensors concentrate reflected laser energy on a small area, making them susceptible to microscopic scratches, grain boundaries, brushed textures and matte finishes, according to the company. Those features can introduce signal variations that are read as dimensional changes, potentially producing false defect warnings and extra inspection. The SGI-N030W instead collects reflected light across a broader area and averages local microscopic peaks and valleys before signal conversion. SinceVision says this reduces the influence of surface roughness and optical scattering and provides more stable displacement measurements on materials such as drawn metals, sandblasted surfaces and coated battery foils.
Specified performance and interfaces
Specified performance includes a 30 mm reference distance and a ±5 mm measurement range. SinceVision cites repeatability of 0.05 µm on a diffuse white target under static conditions and linearity of ±0.02% of full scale across the range. A 50 kHz sampling frequency, equivalent to a 20 µs update interval, is intended to support high-speed measurement and monitoring of dynamic processes. Communication options include RS485, 100Base-TX Ethernet and switchable analogue outputs for 4–20 mA current or 0–10 V voltage signals. Master-slave synchronisation allows two sensors to operate in opposition and measure from either side of a component or moving material.
Battery electrode thickness in line
One principal application is in-line thickness measurement of lithium-ion battery electrodes. Coating thickness and uniformity influence energy density, internal resistance and long-term cell stability. Offline inspection with contact micrometers or drop indicators can introduce operator variability and potentially deform wet or uncured electrode material, while periodic spot measurements cannot provide continuous coverage of local coating variations across a production reel, according to SinceVision. The proposed arrangement uses two synchronised sensors above and below a moving electrode web, mounted on a calibrated, low-thermal-expansion marble gantry. The opposing heads measure their respective clearances to the material, and a controller combines those readings with the fixed mounting datum to calculate absolute thickness in real time.
SinceVision reports that production trials demonstrated stable, repeatable thickness measurement within ±0.3 µm at a web speed of 300 mm/s. The 50 kHz sampling frequency is said to provide high longitudinal resolution, enabling detection of localised coating agglomerations, edge thinning and exposed substrate areas before the electrode proceeds to cell winding.
Semiconductor and motion-control uses
The sensor is also intended for semiconductor manufacturing, where non-contact measurement matters for sensitive wafer surfaces. Potential uses include wafer position verification, edge detection, height measurement, and checks of wafer seating and chuck alignment in atmospheric transfer modules and vacuum load-lock systems. In precision assembly, it can monitor voice coil motors, linear actuators and micro-steppers; the 50 kHz rate enables capture of transient displacement, mechanical oscillations, settling behaviour and end-stop overshoot across the full range. Position data can be sent to machine control systems through Ethernet for real-time monitoring and process control.
Addressing surface-related false warnings
Jack Li, Global Sales and Marketing Director at SinceVision, says false defect warnings caused by surface texture remain a recurring challenge in battery manufacturing and precision assembly. He says conventional point-beam sensors can interpret microscopic scratches and rough coatings as actual thickness variations, slowing production lines and creating a need for manual inspection. The SGI-N030W’s expanded spot is designed to average out those surface-related variations, while synchronisation between opposing heads supports high-speed thickness verification, according to the company. The performance figures cited are manufacturer specifications and trial results, not independent validation.
